Specification

IPC221E-DIR-F60(120)-IN

IPC221E-DIR-F60(120)-IN Uniview Brand Latest Products

Features

  • Day/night functionality
  • Smart IR, up to 30m (98 ft) IR distance
  • Up to 120dB WDR (Wide Dynamic Range)
  • Optical glass window with higher light transmittance
  • IR anti-reflection window to increase the infrared transmittance
  • 3D DNR (Digital Noise Reduction)
  • Triple streams
  • ROI (Region of Interest)
  • 9:16 corridor mode
  • Customized OSD
  • ONVIF Conformance
  • Wide temperature range: -35°C to 60°C (-31°F to 140°F)
  • Wide voltage range of ±25%
  • IP66

Specification

Brand Modal IPC221E-DIR-F60-IN IPC221E-DIR-F120-IN
Camera
Sensor 1/3", 1.3 megapixel, progressive scan CMOS
Shutter Speed Auto/Manual, 1/6~1/8000s
Lens 6mm 12mm
Angle of View (H) 48° 26.3°
Day/Night IR-cut filter with auto switch (ICR)
Min.Illumination Colour: 0.06 Lux (F1.6, 50IRE)
Black & White: 0.03Lux (F1.6, 50IRE)
S/N > 50dB
Image Rotation Supported
WDR 120 dB
Video
Max. Resolution 1280 × 960
Video Compression H.264, MJPEG
Frame Rate 960P (1280*960) 30 fps; 720P (1280*720) 30 fps; D1 (720*576) 25 fps
9:16 Corridor Mode Supported
ROI Supported
Video Streaming Triple
OSD Up to 8 OSDs
Privacy Mask Up to 4 areas
Audio
Audio Compression G.711
Two-way audio Supported
Network
Protocols L2TP, IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, NTP, FTP, HTTP, SNMP, SIP
Compatible Integration ONVIF, IMOS, API
Interface
Audio I/O Audio cable
Input: impedance 35kΩ; amplitude 2 V [p-p]
Output: impedance 600Ω; amplitude 2 V [p-p]
Alarm I/O 1 / 1
Network 10M/100M Base-TX Ethernet
General
Power 12 V DC, or PoE (IEEE802.3af)
Power consumption: 3.5 W (7.5W with IR on)
Dimensions (L x W x H) 187.8 × 76 ×44 mm (7.4” × 3.0” × 1.7”)
Weight 0.58 kg (1.3 lb)
Working Environment -35°C ~ +60°C (-31°F ~ 140°F), Humidity ≤ 90% RH(non-condensing)
Ingress Protection IP66

Download IPC221E-DIR-F60(120)-IN

PDF

Contact Us

This field is required

A valid email address is required

This Field is required

This Field is required

This field is required